• ›
  • High Background in ELISA: Causes and Fixes | Monobind

Troubleshooting Guide  ›  Assay Results

High Background in ELISA: Causes and Fixes

Reviewed by , Director of R&D  ·  Monobind Technical Support  ·  Updated

What causes high background in an ELISA?

High background is most often caused by an insufficient wash step, which leaves unbound conjugate in the wells, or by contaminated reagents. Repeat or strengthen the wash and re-run the assay with fresh reagents.

Possible causes and what to do

Possible causeWhat to do
Insufficient wash stepRepeat the wash step. Make sure wells are filled completely but do not overflow. Consider increasing the number of wash cycles and the soak time between washes.
Contamination of reagentsRun the test again with fresh reagents, taking care to avoid contamination during dispensing.

How can I prevent this in future runs?

Use a consistent wash routine (3–5 cycles with a short soak), maintain your plate washer, and change pipette tips between every sample and reagent.

See our good lab practices for washing, micro-pipetting, and lot-matched common reagents.

Related problems

Still seeing this problem?

Send us your product, lot number, and plate data and our team will help.

This guidance supports general troubleshooting. Always follow the Instructions for Use (IFU) and Certificate of Analysis (CofA) for your specific Monobind test system and lot.