• ›
  • High Absorbance Over the Entire Plate: Causes and Fixes | Monobind

Troubleshooting Guide  ›  Plate Issues

High Absorbance Over the Entire Plate: Causes and Fixes

Reviewed by , Director of R&D  ·  Monobind Technical Support  ·  Updated

Why is absorbance high in every well of my ELISA plate?

High absorbance across the whole plate usually means the wash step was insufficient, so unbound reagent remained, or that the substrate reagent was contaminated. Repeat the wash, use fresh reagents, and check pipette dispensing.

Possible causes and what to do

Possible causeWhat to do
Insufficient wash stepRepeat the wash step. Make sure wells are filled completely but do not overflow.
Contamination of the substrate reagentObtain fresh reagents and check pipettes for proper dispensing.

How can I prevent this in future runs?

Follow the IFU wash cycles and soak times exactly, maintain your washer, and inspect substrate for blue coloration before use.

See our good lab practices for washing, substrate handling, and micro-pipetting.

Related problems

Still seeing this problem?

Send us your product, lot number, and plate data and our team will help.

This guidance supports general troubleshooting. Always follow the Instructions for Use (IFU) and Certificate of Analysis (CofA) for your specific Monobind test system and lot.